210lb POWER ROD REJUVENATOR//COMPANION for Bowflex PR1000/CONQUEST/MOTIVATOR2

Description

!!THIS ITEM CANNOT BE USED FOR TENSION BOOSTING, IT WILL BREAK IMMEDIATELY AND WILL NOT BE REPLACED!!.
!!IF YOUR POWER ROD BOX DOESN'T LOOK THE SAME AS THE ONE IN PHOTO #1 YOU ARE ORDERING THE WRONG ITEM!!
(AND IT WILL NOT FIT YOUR MACHINE PROPERLY)
COMPATIBLE MACHINES::
210LB PR1000 / 210LB CONQUEST / 210LB MOTIVATOR2.
!!!ROD BOX(not included) SHOWN FOR ILLUSTRATIVE PURPOSE ONLY!!!
NOW YOU CAN COMPLETELY FORGET ABOUT THE HASSLES OF SNAPPING SOMETHING ON OR OFF, PUSHING SOME DEVICE THROUGH  THE HOLES IN THE POWER ROD END CAPS, OR BUNCHING THE POWER RODS TOGETHER IN ORDER FOR THEM TO BE STRAPPED TOGETHER.
THIS PATENT PENDING POWER ROD REJUVENATOR//COMPANION IS THE EASIEST AND MOST EFFECTIVE REJUVENATOR ON THE MARKET TODAY.
WHEN INSTALLED(in about 3 minutes or less) IT BECOMES A INTEGRAL(COMPANION) PART OF YOUR MACHINE.
THE OPERATION IS SIMPLE, WHEN YOU ARE NOT USING YOUR MACHINE IT SIMPLY RESTS(self supporting) AT THE UPPER MOST PART OF THE POWER ROD STACK.
IF AND WHEN YOU DECIDE TO USE YOUR MACHINE YOU SIMPLY SLIDE THE REJUVENATOR//COMPANION ALL THE WAY DOWN SO THAT IT RESTS ON THE ROD BOX(can't be more simple than that).
IF YOUR MACHINE HAS SEVERELY BOWED POWER RODS YOU CAN USE 2 POWER ROD REJUVENATORS//COMPANION(one in the middle and the other on top when not in use) FOR POWER ROD REJUVENATION.
...POWER ROD BOX NOT INCLUDED, SHOWN FOR ILLUSTRATIVE PURPOSE ONLY...
INSTALLATION INSTRUCTIONS:
REMOVE ALL OF THE POWER ROD END CAPS THEN INSTALL THE COMPANION WITH THE RODS GOING THROUGH THE PLATE HOLES. REINSTSTALL THE END CAPS...
YOU ARE FINISHED