SONAX Profiline HybridCoating CC One 50ml 267000 LANGZEIT LACK VERSIEGELUNG HOCH

Description

PROFILINE Hybridcoating CC ONE
Hybrid network of different organic and inorganic polymers with Si-Carbon Technology
Packshot PROFILINE Hybridcoating CC One
Paint protection up to 15 months
For professional detailers as well as Prosumer+
Convenience product: apply, wipe off, ready!
Extreme gloss and high smoothness
Quantity sufficient for two vehicles
The set includes 4 sponges - for covering 2 cars.
The vehicle must be scratch-free and completely clean before sealing. If necessary, polish to a hologram-free shine by hand or, better still, using a polishing machine, only use silicone-free polishes from the PROFILINE.
Then wipe with SONAX PROFILINE Prepare and an ultra-fine microfiber cloth.
To apply the coating, dose a few drops of CC One on the light side of an application pad and apply a thin layer to the paint in a cross-coat. The area to be treated should be around half a square meter (1/4 hood).
After a short exposure time of approx. 3-5 minutes, excess product is wiped off streak-free with a new ultra-fine microfiber cloth. Treat the entire vehicle in this way and then let the coating cure for at least 4 hours. During the entire time, the vehicle must be in a clean and dry environment and the surfaces must no longer be touched. If the applicator begins to harden while using CC One, use a new pad.
The content of the can is sufficient for two complete vehicles.
Tip: Every paint behaves a little differently. Therefore, first make a preliminary test on the reactivity of the coating in a small area. Treat a small area 30 x 30 cm and wipe a corner after 2 minutes. If that is very easy, wait another minute and wipe another corner. Then again a minute later, until the wiping becomes tough, which means that you have found the longest exposure time for the paint. If you leave the coating on for too long, it can cause problems wiping it off, as well as streaks and clouds.